Phone Health tells you how worn your battery is, where the charge went, and whether a used phone works before you buy it. It does this with what Android actually gives apps, and it says plainly what it can't know.
Battery wear, estimated from your own charges
Android does not let store apps read a battery's health or its capacity when new. So Phone Health measures: while you charge, it compares Android's charge counter with the percentage and works out how many mAh the battery holds today.
• A figure appears after about 30 percentage points of real charging, and firms up over several charges. Until then it is labelled rough, with its margin shown (for example ±84 mAh).
• Type in the rated capacity of your model, from the maker's specification, and the app turns the measurement into an estimated health percentage and the mAh worn away.
• Cycle count is shown when Android reports it (Android 14 and later, if the maker fills it in).
• Readings are taken in the background every 15 minutes, and every 5 minutes while charging, with no permanent notification.
Screen-off drain
The Usage tab charts your battery level and points out the biggest drop of the last day while the screen was off.
• With usage access allowed in Settings, it splits the drain between screen on and screen off.
• It names apps that ran a visible background service during that time, as leads to look at, with a shortcut to their settings.
• Android does not tell apps how much battery another app used, so this shows drain and leads, not a percentage per app.
Used phone check
Buying a second-hand phone? Run 15 checks on the phone in your hands:
dead pixels, touch, vibration, buttons, speakers and earpiece, microphones, every camera Android lists, proximity, gyroscope, compass, fingerprint or face, charging, Wi-Fi, Bluetooth and GPS.
• A check only passes when a sensor proves it or you confirm it: a camera needs real frames, Bluetooth needs to hear a real device, GPS needs a fix from the GPS chip itself (mock locations are refused).
• Anything not run stays "Not tested", never a pass.
• The report adds the model, Android version and security patch, storage and memory, the battery estimate and visible signs of rooting.
• Share it as a PDF. Each page says it is a self-run test, not a certified inspection.
What no app can check
The report lists what Android hides from apps: the IMEI and whether it is blocked, earlier repairs or replaced parts, carrier and account locks, warranty and water damage. A rooted or modified phone can feed false values to any app, including this one, so run it yourself on the phone you are buying.
Private by design
• No internet permission: the app cannot send anything anywhere.
• No account, no ads, no analytics.
• Camera and microphone checks save no picture and no sound. The GPS position is not stored.
• Battery readings and results stay on the phone until you clear them or uninstall.
Limits worth knowing: some phones derive the charge counter from the percentage or don't provide it at all, and then no wear figure can be measured. Heat and heavy use while charging shift the estimate. The health figure is only as right as the rated capacity you enter.
Estimate battery wear, see screen-off drain and check a used phone before buying